Electrix FilterQueen Owner's Manual download pdf (Page 11)

English... 11

Control Pedal Input: Plug a standard Expression pedal in

here to control the Filter Frequency remotely. Use an expres-

sion pedal, like the Roland EV-5, that terminates with a 1/4"TRS

connector.

Footswitch: Use a standard momentary footswitch to turn

Engage on and off. Filter Queen accepts normally open momen-

tary footswitches. (In the near future an Electrix 3 button

footswitch will be available that will add extra functionality to the

Filter Queen. Stay tuned for more information….)

4 Pole Mono: The Filter Queen operates in a Stereo 2 Pole

filter per channel mode, (unless you switch to 4 Pole mode).

When in Four Pole mode, the Filter Queen switches into Mono

operation by summing the left and right channels before the 4

pole filter. A two pole filter will give you a gentler response, in

technical terms it is defined as a 12dB/octave filter. A 4 pole or

24dB/octave filter will give you a much steeper filter response

that will sound more pronounced. 4 pole mono is especially

appropriate for effecting electric guitar and bass.

RCA Stereo Outputs: The RCA output level is nominally

+4 dBu

1/4" Outputs: This output produces an unbalanced +4dBu

signal.

Phono/Line Switch: This switches the RCA inputs to

accept phono or line level.

RCA Stereo Inputs: When the Phono/Line switch is in the

Line position, this input is optimized for a +4dBu input signal.

When the Phono/Line switch is set to Phono, the RIAA phono

pre-amp will accept a range of cartridge output levels.

1/4" Inputs: This input is optimized for +4 dBu input signal.

Grounding Post: Connect the ground wire from your

turntable here.

Cable Strain Relief: The power supply cable can be

looped around this to prevent stress on the power entry jack.

UUnnddeerrssttaannddiinngg tthhee FFiilltteerr QQuueeeenn

•

BBaacckk PPaanneell

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Electrix FilterQueen Owner's Manual Page 11